Product Description

Specification:
Item Type: Colostomy Bag
Material: Film + Plastic + Silicone
Quantity: 10pcs

Package List:
10 x Colostomy Bag
1 x Measure Ruler

Usage:
(1) Clean the stoma with warm water, dry the surrounding skin well, and keep the skin clean and dry.
(2) Use stoma ruler to measure stoma size.
(3) According to the measured shape and size of the stoma, cut the appropriate size of the hole on the pocket film. The diameter of the hole is about 2mm larger than the diameter of the stoma.
(4) Peel off the film protective paper.
Note: Before cutting the one-piece bag, separate the front and back film of the bag body to avoid being cut by scissors.
(5) When installing the bag, first blow a little air into the bag, in case the bag film paste, then fit the cut hole and cover the stoma, first light pressure colostomy near the skin, then slowly into the surrounding pressure make film against the skin, then slowly into the surrounding pressure make the film against the skin, hold the film with hand for a few minutes when the temperature is low, pressure and temperature of the hand can make the film paste more stable.
(6)The plastic buckle on the bag body is aligned with the buckle on the film, and the pressure is gradually connected from the bottom to the top. After obviously feeling that each point is clamped, gently pull the body to check whether the buckle is firm.
(7)When one-third to half of the bag body is full, remove the bag body, pinch the skin wing on the connecting ring, separate the buckle ring from top to bottom, and slowly remove the bag body.
(8)When stripping the film, one hand hold the skin around the film, the other hand slowly tear off the film, if the film paste is too tight, do not pull in force to avoid skin damage, can use warm water or skin cleaning agent to assist stripping.