- This instrument can help you diagnose injector problems and can be used to test injectors one by one or two at the same time to help confirm sticking, leaking, damage or burnout conditions.
- Output power: 12V & 5V switchable, includes 2 pairs connector. It has 2 output voltage levels and 4 pulse signal output modes. Users can choose any one according to their needs.
- It uses the 12V battery on the vehicle or an external DC 12V (recommended at least 1.5A) power adapter as the power supply to work continuously.
- Input short-circuit protection function. Mode helps identify good and bad injectors with the engine off. This instrument can be used with any fuel pressure tester.
- Selectable activation modes: continuous, short medium and long switching outputs. The output wire is made of silica gel, which has better high and low temperature characteristics.
From the brand
Shkalacar Motorcycle Car Part
Automotive electronics, Exterior Parts, Motorcycle Parts, Auto Remote Central Kit, Speedometer, Security Alarm System, Tachometer Gauge
-
-
-
-
-
-
-
-
-
-
Shkalacar is a company dedicated to the research and development, production, sales and service.
We specialize in AUTO Replacement Part, manufacture & assemble our products. Include Automotive electronics, Exterior Parts, Motorcycle Parts, Auto Remote Central Kit, Speedometer, Security Alarm System, Tachometer Gauge and so on. Focused on developing innovative, high-performance solutions for aftermarket customers around the world.
Product Description
Shkalacar Fuel Injector Tester and Adapter for Diagnosis Cleaning
- Turn off the Car’s engine. NOTE: Gasoline car only, NOT the diesel car.
- Remove the wire plug with the fuel injector to be tested, then connect the RED pulse output terminals of the vehicle.
- Connect to the red clip of the tester to the positive terminal of 12 V car battery, and connect the black clip to the negative terminal of the battery.
- Press “ Mode set ” key to select the required pulse signal output mode, and the screen will display the currently selected mode.
- continuous, short medium and long switching outputs.
Mode 1: Single Pulse Mode — The Fuel Injector Tester will send out a pulse with a pulse width of about 255 milliseconds.
Mode 2: Short Pulse Mode.— The Fuel Injector Tester will send out 50 pulses with a pulse width of about 7 milliseconds.
Mode 3: Long Pulse Mode — The Fuel Injector Tester will send out 100 pulses with a pulse width of about 3.5 milliseconds.
Mode 4: Continuous Pulse Mode — The Fuel Injector Tester will continuously output pulses with a pulse rate of about 50 pulses per 1450 milliseconds and a pulse width of 7 milliseconds.
- After selecting the desired pulse signal output mode, press the “PULSE” key, the instrument will output pulses to the automotive injector to be tested, and the signal indicator will light up when the pulses are output.
- After the test is completed, if you need to repeat the test, you can press the “PULSE” button again. If you want to change the pulse mode, you need to disconnect the battery of the instrument and then reconnect it.
|
|
|
|
|---|---|---|
With 4 Pluse Modes |
12V Battery / External Power Adapter |
2 Different Size Fuel Injector Cleaner Adapters |
|
|
|
|
|---|---|---|
4-Wire Dual Channel, Can Test 2 Injectors at the Same Time |
1m Power Supply Cable |
Storage Bag |
