- Solid forged Brass plates with genuine Lead Crystal door knobs for detail and clarity
- Privacy: ideal for bathrooms, bedrooms or rooms where a locking mechanism is needed
- Complete set for one door (both sides) with 2-3/4” backset
- Perfect for restoration and easy to install on modern pre-drilled doors
- Hand assembled in USA
From the manufacturer
Nostalgic Interior Set Functions
|
|
|
---|---|---|
Passage |
PrivacyLatch with locking mechanism. A privacy pin next to the knob or lever provides locking through the plate or rosette. Ideal for bathrooms, bedrooms or rooms where a locking mechanism is needed. Standard door thickness range: 1-3/8 to 1-3/4 inches thick. |
Double DummyTwo door sets with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts). Note: Surface mounted or thru-bolted. |
|
|
---|---|
Single DummyDoor set for one side of door with no lock or latch. The knobs or levers on this door set don’t turn or operate a latch. Ideal for closet doors, pantry doors or side-by-side French doors (used with roller catch, flush bolts or surface bolts). Note: Surface mounted. |
Interior MortiseA mortise lock is a lock that requires a pocket – the mortise – to be cut into the door. The lock is installed into the pocket in the edge of the door. If your door is not already prepared for a mortise lock, you (or a skilled professional) will have to use a mortise saw to cut into the door so the lock fits properly. Our mortise locks fit 2-1/4 inches Backset and include a skeleton key locking mechanism. |
How to Measure for Backset?
When installing a tubular latch with passage or privacy function, it’s very important that you know what your backset measurement is – either 2-3/8 or 2-3/4 inches. (see graphic).
The backset is the distance from the edge of the door to center of the 2-1/8 inches (54 millimeter) diameter bore hole.
In the U.S., there are two common backsets for residential door locks, 2-3/8 or 2-3/4 inches.
Dummy sets have no latch and are surface mounted, therefore a backset measurement is not needed.