- 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to use magnetic pump, the propeller will magnetically circulates liquids. Please note: Moving giant vessel with hot wort by hand is not safe.
- 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-vibration function, aim to reduce the influence of motor vibration during working. Realized a high efficiency smooth running, and excellent quiet circulation. Maximum Lifting Height: 2.7Meters
- 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation pump, industrial and home brew equipment. Great heat resistant up to 120℃/ 248℉.
- 【Easy to Use】 : Prime by running liquid through the pump by connecting with water hose prior to turning it on; The liquid travels from the water hose into the pump, and once the pump is powered on, the propeller will start to circulate the liquids; Perfect for transferring and circulation.
- 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell if any problem, we would try our best to help. Lifetime technical support. It is not recommended to run this pump continuously for more than 2 hours to avoid overheating of the motor.
From the brand
Next page
Product Description
Safe liquid pump with high output volume and quiet operation for both industrial and domestic use.
Food grade stainless steel features high temperature resistance, non-toxic, and rustproof;
FERRODAY Magnetic Drive Pump – Booster Pump
Safe Priority: Use this magnetic pump to transfer piping hot and heavy loads of liquid instead of moving giant brew kettles yourself, a good investment to avoid unpleasant accidents and injuries.
Save Time and Effort: Move hot and cold liquids at Max Flow of 19 LPM (5 GPM). Very efficient and all you have to do is simply powering the pump on.
- Perfect for transferring liquid during brewing like wort circulation, wort cooling circulation;
- Perfect for transferring wort to any kinds of vessels like fermenters, pots, kettles, tanks;
- No matter hot or cold!
FEATURES:
|
|
|
|
---|---|---|---|
High Temp Resistance:
|
No Leak & No Block:
|
Safe Long power Cord:
|
Lifetime-Using:
|
Stainless Steel Head Magnetic Pump 15RM-110 – the safest and most efficient way to move heavy loads of liquid!
- Max Capacity: 16/19 L/min—Rated Capacity: 8/12 L/min
- Max Head :2.7/3.4 Meter—Rated Head:1.5 Meter
- Max Temperature: 120 ℃ (248 ℉)
- Outlet/ Inlet: 1/2″ inch NPT
- American Standard: 100/110V
Package:
Gross Weight: 6.23 lb
Content: Magnetic Drive Pump X 1
PLEASE DO NOT RUN DRY
- This is NOT a self-priming pump, the head must be connected with water hose and let the water into the pump before turning on the pump.
- If power cut suddenly, please close the outlet gate valve.
Please Note:
Please attach the pump at least 12” lower than your vessel.
Not for high viscosity fluids like beeswax, honey or cream;
Please after use- it will be very hard to clean up if you allow the wort to dry in the pump.
- 1. Circulate clean water by 1-2 minutes;
- 2. Switch to cleaner for 1-2 minutes;
- 3. Circulate clean water again;
- 4. Circulate your sanitizer;
- 5. Dry in the air before storing
DO NOT RUN THE PUMP DRY —- Please prime the pump before turning it on.
- Priming Procedure:
- Position the pump at least 8-12″ lower than the vessel you are pumping from.
- Open the valve on the vessel and allow liquid to flow from the vessel into the pump head.
- Open the valve on the outlet and then turn the pump on.
Wort Pump with Long power Cord | 1/2 NPT Female Quick Disconnect For Wort Pumps for Wort Chiller | 1/2 NPT Homebrew Kettle Thermometer | Wort Chiller 30 Plate 1/2 NPT Plate Chiller | 1/2 NPT Female Quick Disconnect For Wort Pumps for Wort Chiller | |
---|---|---|---|---|---|
FOR HOMEBREW | ✓ | ✓ | ✓ | ✓ | ✓ |